Hans 600 acupuncture electrostimulator

The E600 Han has 6 outputs. It is an electroacupuntor with advanced technology design. Attractive, light, clinical and professional use.

It has digital screens for all values ​​to show:
- intensity
- frequency
- pulse width
- The time of stimulation during operation, as well as numerical visualization to show the sensitivity of detection during the location of acupuncture points-
electrodes. It has 6 different types of waveforms, which also includes the Han waveform. The E600 HAN stimulator is one of the most powerful acupuncture electrostimulators.

Technical description:
- The output intensity of the six channels is shown on a digital screen (0.5x0.7 ").
- It has 32 levels for a better adjustment of the output intensity. All operational functions are digitally shown for easy recording and future re-selection and reference. On / off, high and low output selection.
- Memory system, when turning off and restarting, all selections are reproduced, which is convenient for the following treatment.

Technical characteristics:

Output channels: 6
volts and current:
-low 0-5 volts, 0-10 mA (milliamperia) (load of 500 w)
-high 0-20 volts, 0-40 ma (milliamp (milliamps) (500 w of load) Pulse shape: Adjustable
Output modes: continuous, intermittent, wavy, dense and dispersed, modular, have
timer: 1 to 60 minutes and continuous Volts device dimensions: 240 x 185 x 70 mm loc: MONITORING OF THE CUTANEOUS IMPEDANCE
Conductivity LOC:

Possible errors in the use of the E600 stimulator have
the error LED will light when:

- The output intensities are not established in "0" during the change in a waveform
- the Hi / Low output is changed or the Loc / Stim mode is activated.
- When the error LED is illuminated, all intensities will be restored to "0". Press any key, turn off the error and buzzer LED and return to normal operation.

stimulator content:
- Stimulator with probe
- Connection cable (assorted colors) 6 units.